‹ Tuesday, November 14, 2023 › | |
08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
|
›8:00 (50min)
8:00 - 8:50 (50min)
Registration
Attendees welcome and registration
8:50 - 10:30 (1h40)
Fluid flow around structures
Auditorium
Sylvain Guillou and Ali Hatem Laatar
› EFFECT OF FLEXIBILITY ON THE HYDRODYNAMIC PERFORMANCES OF A 3D PITCHING PLATE
- Nathan Lemartinel, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique, Segula Technologies [France]
08:50-09:10 (20min)
› A NUMERICAL FSI SIMULATION OF THE HYDROELASTIC RESPONSE OF A FLEXIBLE NACA0015 IN TURBULENT FLOW
- Mustapha Benaouicha, Segula Technologies, LUSAC (France)
09:10-09:30 (20min)
› Design and experimentation of a tandem axis fluttering hydrofoil
- Ludovic Chatellier, Institut Pprime
09:30-09:50 (20min)
› A Robust Framework for Simulating Fluid-Structure Interactions of Highly Deformable Slender Bodies: Sharp Interface Immersed Boundary Method for Low Density Ratios and High Reynolds Flow
- Yan Delauré, Dublin City University [Dublin]
09:50-10:10 (20min)
› MULTIDISCIPLINARY ANALYSIS OF A UAV WING USING OPEN SOURCE SOFTWARE INTEGRATION
- Abdelkader Benaouali, Ecole Militaire Polytechnique [Alger]
10:10-10:30 (20min)
10:30 - 11:00 (30min)
Coffee break and 2nd Poster Session
Lobby
›11:00 (1h)
Experimental analysis of fluid induced vibration on lifting surfaces in a hydrodynamic tunnel
Professor Jacques-André ASTOLFI › Auditorium
11:00 - 12:00 (1h)
Experimental analysis of fluid induced vibration on lifting surfaces in a hydrodynamic tunnel
Auditorium
Professor Jacques-André ASTOLFI
›12:00 (2h)
12:00 - 14:00 (2h)
Lunch
14:00 - 16:00 (2h)
Mechanical engineering
Room 1
Djamel Sadaoui and Abdelhamid Becheur
› EFFECTS OF VARIOUS SHAPED HOLES ON FILM COOLING EFFECTIVENESS
- Ilyes Belouddane, Faculty of Mechanical Engineering, USTO-MB, Oran, Faculty of Mechanical Engineering, USTO-MB, Oran
14:00-14:20 (20min)
› A COMPARATIVE STUDY ON UNSTEADY MODEL FOR THE THERMAL CHARACTERIZATION OF FIREFIGHTER PROTECTIVE CLOTHING
- Chafik BENSALEM, Department of Mechanical Engineering, Faculty of Sciences and Applied Sciences, University Akli Mohand Oulhadj of Bouira,10000, Bouira, Algeria
14:20-14:40 (20min)
› NUMERICAL STUDY of FORCED CONVECTION HEAT TRANSFER in TAYLOR-COUETTE SYSTEM without AXIAL FLOW
- Ismahane Chaieb, University Freres-Mentouri Constantine1,Constantine. - Toufik Boufendi, University Freres-Mentouri Constantine1,Constantine.
14:40-15:00 (20min)
› Effect of texturing tilting pads journal bearing on tribological and mechanical behavior
- Foullani Abdelhalim, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]
15:00-15:20 (20min)
› INFLUENCE OF TWO-PHASE AND SINGLE-PHASE FLUIDS IN SLIDING BEARINGS OPERATING UNDER TURBULENT REGIME.
- Imene BOUCHELAGHEM, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]
15:20-15:40 (20min)
› EFFECT OF COLUMN LENGTH ON THE PERFORMANCE OF AN AIRLIFT PUMP
- Hamid Tighzert, Faculty of Technology, Department of Process Engineering, Environmental Engineering Laboratory, University of Bejaia, 06000, Algeria
15:40-16:00 (20min)
14:00 - 16:00 (2h)
Fluid Flow and turbulence
Room 2
Lyes Amara and Ali Hatem Laatar
› Characterization of turbulent separated flow on backward facing step
- KOUAH Salim, blida 1 univercity, AMC
14:00-14:20 (20min)
› Crushing of a Newtonian fluid between two circular disks
- Rafik BENCHALLAL, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa]
14:20-14:40 (20min)
› STABILITY OF BOUNDARY LAYER STAGNATION POINT FLOW OVER A STRETCHING/SHRINKING SHEET WITH SUCTION
- Meheni BOUTAGHANE, Laboratoire de Mécanique Matériaux et Energétique, Faculté de Technologie, Université de Bejaia, 06000 Bejaia
14:40-15:00 (20min)
› Stretching/shrinking effect on thermal stability of three-dimensional stagnation point flow
- Samir MAMACHE, Université Abderrahmane Mira [Béjaïa] - MENDIL FATSAH, Université Abderrahmane Mira [Béjaïa] - Faïçal Naït Bouda, Université Abderrahmane Mira [Béjaïa]
15:00-15:20 (20min)
› CONTROL OF NON-NEWTONIAN LIQUID FILM FLOW ON AN INCLINED PLANE
- ABDELMALEK MEHAYECH, University of Bejaia
15:20-15:40 (20min)
› Evaluating a transition-turbulence model at high Reynolds numbers for aerodynamic analysis of a symetrical NACA airfoil
- Fatima Zohra GUERRAB, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]
15:40-16:00 (20min)
16:00 - 16:30 (30min)
Coffee break and 2nd Poster Session
Lobby
16:30 - 17:30 (1h)
Sloshing tank
Auditorium
Moussa Allouche
› LIQUID SLOSHING IN 2D FLEXIBLE RECTANGULAR TANK SUBJECTED TO SEISMIC EXCITATION
- Kim KHA, Segula Technologies [France]
16:30-16:50 (20min)
› NONLINEAR SLOSHING OF TWO SUPERIMPOSED IMMISCIBLE LIQUIDS IN A TWO-DIMENSIONAL RECTANGULAR TANK
- MEZIANI Bachir, Laboratoire de physique théorique
16:50-17:10 (20min)
› DYNAMICS OF A DEFORMABLE FLOATING LIQUID TANK UNDER A REGULAR WAVE EFFECT
- Fatiha GHOUINI, Research Laboratory of Applied Hydraulics and Environment, Faculty of Technology, University of Bejaia, Université de Caen Normandie, LUSAC, EA 4253, Normandy Université
17:10-17:30 (20min)
|
Session | Speech | Logistics | Break | Tour |