08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
8:00 - 8:50 (50min)
Registration
Attendees welcome and registration
8:50 - 9:30 (40min)
Opening speech
Auditorium
Conference Organizers and Rector of the Unviersity of Bejaia
9:30 - 10:30 (1h)
Medieval Béjaia: Center for the Transmission of The Mediterranean Knowledge
Auditorium
Professor Djamil Aissani
10:30 - 11:00 (30min)
Coffee break and 1st Poster Session
Lobby
11:00 - 12:00 (1h)
Marine Renewable Energies and Fluid structure Interaction: a recent story
Auditorium
Professor Sylvain Guillou
12:00 - 14:00 (2h)
Lunch
14:00 - 16:00 (2h)
Hydrodynamics
Room 1
Sylvain Guillou and Faiçal Nait Bouda
› The hydrodynamic analysis of planing hulls
- Rachid Tayeb, Laboratoire d'Aear-Hydrodynamique naval (LAHN)
14:00-14:20 (20min)
› FLUID-STRUCTURE INTERACTION WITH VISCOELASTICITY IN NUMERICAL SIMULATION OF WATER HAMMER
- Boualem Messaoudene, Université Mouloud Mammeri [Tizi Ouzou]
14:20-14:40 (20min)
› NUMERICAL ANALYSIS OF FLUID-STRUCTURE INTERACTION IN LID-DRIVEN CAVITY WITH DISTURBING ELEMENTS
- Nesrine ABDELLI, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa]
14:40-15:00 (20min)
› FLUID-STRUCTURE INTERACTION MODELLING APPLIED FOR WIND TURBINE BLADE
- Bekhti Ahmed, Centre de Développement des Energies Renouvelables - Ali Boudis, Centre de Développement des Energies Renouvelables - Madjid TATA, Centre de Développement des Energies Renouvelables
15:00-15:20 (20min)
› NUMERICAL PREDICTION OF THE EFFECT OF CONTACT CONDITIONS ON THE SEISMIC DAMAGE BEHAVIOR OF GRAVITY DAMS
- Zahia Abdelli, Research Laboratory of Applied Hydraulic and Environment LRHAE, Faculty of Technology, University of Bejaia, Algeria
15:20-15:40 (20min)
› MAGNETO-HYDRODYNAMIC COUPLING OF A SEA WAVE ENERGY CONVERSION SYSTEM
- Bachir Ouartal, LATAGE, Laboratory, Mouloud Mammeri University of Tizi-Ouzou, B.P17 RP, Tizi-Ouzou, 15000,Algeria - ZAOUIA Mustapha, LATAGE, Laboratory, Mouloud Mammeri University of Tizi-Ouzou, B.P17 RP, Tizi-Ouzou, 15000,Algeria
15:40-16:00 (20min)
14:00 - 16:00 (2h)
Soil and porous media
Room 2
Ouali Amiri and Mouloud Mansouri
› BI-DIRECTIONAL NONLINEAR SEISMIC RESPONSE OF A POROVISCOELASTIC SOIL PROFILE UNDER DIFFERENT CONDITIONS OF PORE WATER-SATURATION
- Toufiq OUZANDJA, National Earthquake Engineering Research Center (CGS), Seismic Hazard Division,, Ecole Nationale Supérieure des travaux Publics, Laboratoire des Travaux Publics Ingénierie de Transport et Environnement (TPiTE)
14:00-14:20 (20min)
› DEM Investigation of the Effect of Particle Friction on the Bearing Capacity of Shallow Foundations in Granular Soils
- Ahlem Rezig, Unité de Recherche Matériaux Emergents (URME)
14:20-14:40 (20min)
› INFLUENCE OF INTERSTITIAL PRESSURE ON SWELLING PARAMETERS OF CLAYEY SOILS
- Mehdi MEBARKI, Faculty of Science and Technology, Department of Science and Technology, Tamanghasset University, Civil Engineering Laboratory, Risks and Soil-Structure Interaction (LGC - ROI), University of Batna 2
14:40-15:00 (20min)
› Internal erosion modeling based on mass transfer in porous media
- Abderrezak Bouziane, Université de Bejaia, Laboratoire de génie de la construction et architecture
15:00-15:20 (20min)
› PERFORMANCE EVALUATION OF CSARAO-1 HYBRID ALGORITHM ON ESTIMATING SPATIALLY DISTRIBUTED HYDRAULIC CONDUCTIVITY TENSORS IN A STEADY-STATE GROUNDWATER FLOW MODEL
- Walid Tadj, Amar Telidji University, Research Laboratory of Water Resources, Soil and Environment
15:20-15:40 (20min)
› NONLINEAR POROMECHANICAL MODELING OF WATER-CRACK INTERACTION IN CONCRETE GRAVITY DAMS
- Mohammed Ibrahim Bessaid, Université de Tlemcen
15:40-16:00 (20min)
16:00 - 16:30 (30min)
Coffee break and 1st Poster Session
Lobby
16:30 - 17:30 (1h)
Heat transfer and thermohydraulics
Auditorium
Yan Delauré and Djamel Sadaoui
› Conjugate heat transfer model for multiphase flow : Application to a liquid piston gas compression
- Mustapha BENAOUICHA, Segula Technologies. Naval and Energy Engineering Research and Innovation Unit. 9 avenue Edouard Belin, 92500 Rueil-Malmaison, France
16:30-16:50 (20min)
› CFD analysis of thermo-hydraulic mixing in short microfluidic devices
- KOUADRI Amar, Department of Mechanical Engineering, University of Djelfa, Djelfa 17000, Algeria
16:50-17:10 (20min)
› Computational study of thermo-hydraulic performance of curved tube receiver operating with and without nanofluid
- Tawfiq Chekifi, Unité de Recherche Appliqué en Energies Renouvelables, URAER, Centre de Développement des Energies Renouvelables, CDER, 47133, Ghardaïa, Algeria - Moustafa Boukraa, Research Center in Industrial Technologies (CRTI), P.O. Box 64 Cheraga 16014. Algiers. ALGERIA.
17:10-17:30 (20min)
8:00 - 8:50 (50min)
Registration
Attendees welcome and registration
8:50 - 10:30 (1h40)
Fluid flow around structures
Auditorium
Sylvain Guillou and Ali Hatem Laatar
› EFFECT OF FLEXIBILITY ON THE HYDRODYNAMIC PERFORMANCES OF A 3D PITCHING PLATE
- Nathan Lemartinel, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique, Segula Technologies [France]
08:50-09:10 (20min)
› A NUMERICAL FSI SIMULATION OF THE HYDROELASTIC RESPONSE OF A FLEXIBLE NACA0015 IN TURBULENT FLOW
- Mustapha Benaouicha, Segula Technologies, LUSAC (France)
09:10-09:30 (20min)
› Design and experimentation of a tandem axis fluttering hydrofoil
- Ludovic Chatellier, Institut Pprime
09:30-09:50 (20min)
› A Robust Framework for Simulating Fluid-Structure Interactions of Highly Deformable Slender Bodies: Sharp Interface Immersed Boundary Method for Low Density Ratios and High Reynolds Flow
- Yan Delauré, Dublin City University [Dublin]
09:50-10:10 (20min)
› MULTIDISCIPLINARY ANALYSIS OF A UAV WING USING OPEN SOURCE SOFTWARE INTEGRATION
- Abdelkader Benaouali, Ecole Militaire Polytechnique [Alger]
10:10-10:30 (20min)
10:30 - 11:00 (30min)
Coffee break and 2nd Poster Session
Lobby
11:00 - 12:00 (1h)
Experimental analysis of fluid induced vibration on lifting surfaces in a hydrodynamic tunnel
Auditorium
Professor Jacques-André ASTOLFI
12:00 - 14:00 (2h)
Lunch
14:00 - 16:00 (2h)
Mechanical engineering
Room 1
Djamel Sadaoui and Abdelhamid Becheur
› EFFECTS OF VARIOUS SHAPED HOLES ON FILM COOLING EFFECTIVENESS
- Ilyes Belouddane, Faculty of Mechanical Engineering, USTO-MB, Oran, Faculty of Mechanical Engineering, USTO-MB, Oran
14:00-14:20 (20min)
› A COMPARATIVE STUDY ON UNSTEADY MODEL FOR THE THERMAL CHARACTERIZATION OF FIREFIGHTER PROTECTIVE CLOTHING
- Chafik BENSALEM, Department of Mechanical Engineering, Faculty of Sciences and Applied Sciences, University Akli Mohand Oulhadj of Bouira,10000, Bouira, Algeria
14:20-14:40 (20min)
› NUMERICAL STUDY of FORCED CONVECTION HEAT TRANSFER in TAYLOR-COUETTE SYSTEM without AXIAL FLOW
- Ismahane Chaieb, University Freres-Mentouri Constantine1,Constantine. - Toufik Boufendi, University Freres-Mentouri Constantine1,Constantine.
14:40-15:00 (20min)
› Effect of texturing tilting pads journal bearing on tribological and mechanical behavior
- Foullani Abdelhalim, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]
15:00-15:20 (20min)
› INFLUENCE OF TWO-PHASE AND SINGLE-PHASE FLUIDS IN SLIDING BEARINGS OPERATING UNDER TURBULENT REGIME.
- Imene BOUCHELAGHEM, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]
15:20-15:40 (20min)
› EFFECT OF COLUMN LENGTH ON THE PERFORMANCE OF AN AIRLIFT PUMP
- Hamid Tighzert, Faculty of Technology, Department of Process Engineering, Environmental Engineering Laboratory, University of Bejaia, 06000, Algeria
15:40-16:00 (20min)
14:00 - 16:00 (2h)
Fluid Flow and turbulence
Room 2
Lyes Amara and Ali Hatem Laatar
› Characterization of turbulent separated flow on backward facing step
- KOUAH Salim, blida 1 univercity, AMC
14:00-14:20 (20min)
› Crushing of a Newtonian fluid between two circular disks
- Rafik BENCHALLAL, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa]
14:20-14:40 (20min)
› STABILITY OF BOUNDARY LAYER STAGNATION POINT FLOW OVER A STRETCHING/SHRINKING SHEET WITH SUCTION
- Meheni BOUTAGHANE, Laboratoire de Mécanique Matériaux et Energétique, Faculté de Technologie, Université de Bejaia, 06000 Bejaia
14:40-15:00 (20min)
› Stretching/shrinking effect on thermal stability of three-dimensional stagnation point flow
- Samir MAMACHE, Université Abderrahmane Mira [Béjaïa] - MENDIL FATSAH, Université Abderrahmane Mira [Béjaïa] - Faïçal Naït Bouda, Université Abderrahmane Mira [Béjaïa]
15:00-15:20 (20min)
› CONTROL OF NON-NEWTONIAN LIQUID FILM FLOW ON AN INCLINED PLANE
- ABDELMALEK MEHAYECH, University of Bejaia
15:20-15:40 (20min)
› Evaluating a transition-turbulence model at high Reynolds numbers for aerodynamic analysis of a symetrical NACA airfoil
- Fatima Zohra GUERRAB, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]
15:40-16:00 (20min)
16:00 - 16:30 (30min)
Coffee break and 2nd Poster Session
Lobby
16:30 - 17:30 (1h)
Sloshing tank
Auditorium
Moussa Allouche
› LIQUID SLOSHING IN 2D FLEXIBLE RECTANGULAR TANK SUBJECTED TO SEISMIC EXCITATION
- Kim KHA, Segula Technologies [France]
16:30-16:50 (20min)
› NONLINEAR SLOSHING OF TWO SUPERIMPOSED IMMISCIBLE LIQUIDS IN A TWO-DIMENSIONAL RECTANGULAR TANK
- MEZIANI Bachir, Laboratoire de physique théorique
16:50-17:10 (20min)
› DYNAMICS OF A DEFORMABLE FLOATING LIQUID TANK UNDER A REGULAR WAVE EFFECT
- Fatiha GHOUINI, Research Laboratory of Applied Hydraulics and Environment, Faculty of Technology, University of Bejaia, Université de Caen Normandie, LUSAC, EA 4253, Normandy Université
17:10-17:30 (20min)
8:00 - 8:50 (50min)
Registration
Attendees welcome and registration
8:50 - 10:30 (1h40)
Hydraulic structures
Auditorium
Abdelhamid Becheur and Djamaleddine Boumzerane
› SEISMIC ANALYSIS OF A CONCRETE GRAVITY DAM TAKING INTO ACCOUNT FLUID-STRUCTURE INTERACTION
- Zahia Abdelli, Research Laboratory of Applied Hydraulic and Environment LRHAE, Faculty of Technology, University of Bejaia, Algeria
08:50-09:10 (20min)
› A fast-time simulation for the deformation of a liquid-core capsule in flow using Dynamic Reduced Model
- Toufik Boubehziz, Équipe Linguistique computationnelle
09:10-09:30 (20min)
› A SEMI-ANALYTICAL METHOD FOR PARAMETRIC ANALYSIS OF HYDROSEISMIC FORCES ON DAMS
- Abdelmadjid TADJADIT, Ecole Nationale Polytechnique [Alger]
09:30-09:50 (20min)
› A PORO-FRACTURE MODEL FOR WATER-CRACK INETRACTION IN CONCRETE UNDER SEISMIC LOADINGS
- Mohammed Matallah, Université de Tlemcen
09:50-10:10 (20min)
› IMPLEMENTATION OF AAR MODEL FOR CONCRETE IN ABAQUS EXPLICIT: APPLICATION TO HYDRAULIC STRUCTURE
- Ali Nour, Hydro-Québec
10:10-10:30 (20min)
10:30 - 11:00 (30min)
Coffee break and 3rd Poster Session
Lobby
11:00 - 12:00 (1h)
A Few Questions Arising in Optimal Control and Application
Auditorium
Professor Philippe Destuynder
12:00 - 14:00 (2h)
Lunch
14:00 - 18:30 (4h30)
Sightseeing tour
Béjaia and its surroundings
19:00 - 22:00 (3h)
Conference dinner and closing ceremony
