Planning

Monday, November 13, 2023

Time Event (+)
08:00 - 08:50 Registration - Attendees welcome and registration  
08:50 - 09:30 Opening speech (Auditorium) - Conference Organizers and Rector of the Unviersity of Bejaia  
09:30 - 10:30 Medieval Béjaia: Center for the Transmission of The Mediterranean Knowledge (Auditorium) - Professor Djamil Aissani  
10:30 - 11:00 Coffee break and 1st Poster Session (Lobby)  
11:00 - 12:00 Marine Renewable Energies and Fluid structure Interaction: a recent story (Auditorium) - Professor Sylvain Guillou  
12:00 - 14:00 Lunch  
14:00 - 16:00 Hydrodynamics (Room 1) - Sylvain Guillou and Faiçal Nait Bouda (+)  
14:00 - 14:20 › The hydrodynamic analysis of planing hulls - Rachid Tayeb, Laboratoire d'Aear-Hydrodynamique naval (LAHN)  
14:20 - 14:40 › FLUID-STRUCTURE INTERACTION WITH VISCOELASTICITY IN NUMERICAL SIMULATION OF WATER HAMMER - Boualem Messaoudene, Université Mouloud Mammeri [Tizi Ouzou]  
14:40 - 15:00 › NUMERICAL ANALYSIS OF FLUID-STRUCTURE INTERACTION IN LID-DRIVEN CAVITY WITH DISTURBING ELEMENTS - Nesrine ABDELLI, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa]  
15:00 - 15:20 › FLUID-STRUCTURE INTERACTION MODELLING APPLIED FOR WIND TURBINE BLADE - Bekhti Ahmed, Centre de Développement des Energies Renouvelables - Ali Boudis, Centre de Développement des Energies Renouvelables - Madjid TATA, Centre de Développement des Energies Renouvelables  
15:20 - 15:40 › NUMERICAL PREDICTION OF THE EFFECT OF CONTACT CONDITIONS ON THE SEISMIC DAMAGE BEHAVIOR OF GRAVITY DAMS - Zahia Abdelli, Research Laboratory of Applied Hydraulic and Environment LRHAE, Faculty of Technology, University of Bejaia, Algeria  
15:40 - 16:00 › MAGNETO-HYDRODYNAMIC COUPLING OF A SEA WAVE ENERGY CONVERSION SYSTEM - Bachir Ouartal, LATAGE, Laboratory, Mouloud Mammeri University of Tizi-Ouzou, B.P17 RP, Tizi-Ouzou, 15000,Algeria - ZAOUIA Mustapha, LATAGE, Laboratory, Mouloud Mammeri University of Tizi-Ouzou, B.P17 RP, Tizi-Ouzou, 15000,Algeria  
14:00 - 16:00 Soil and porous media (Room 2) - Ouali Amiri and Mouloud Mansouri (+)  
14:00 - 14:20 › BI-DIRECTIONAL NONLINEAR SEISMIC RESPONSE OF A POROVISCOELASTIC SOIL PROFILE UNDER DIFFERENT CONDITIONS OF PORE WATER-SATURATION - Toufiq OUZANDJA, National Earthquake Engineering Research Center (CGS), Seismic Hazard Division,, Ecole Nationale Supérieure des travaux Publics, Laboratoire des Travaux Publics Ingénierie de Transport et Environnement (TPiTE)  
14:20 - 14:40 › DEM Investigation of the Effect of Particle Friction on the Bearing Capacity of Shallow Foundations in Granular Soils - Ahlem Rezig, Unité de Recherche Matériaux Emergents (URME)  
14:40 - 15:00 › INFLUENCE OF INTERSTITIAL PRESSURE ON SWELLING PARAMETERS OF CLAYEY SOILS - Mehdi MEBARKI, Faculty of Science and Technology, Department of Science and Technology, Tamanghasset University, Civil Engineering Laboratory, Risks and Soil-Structure Interaction (LGC - ROI), University of Batna 2  
15:00 - 15:20 › Internal erosion modeling based on mass transfer in porous media - Abderrezak Bouziane, Université de Bejaia, Laboratoire de génie de la construction et architecture  
15:20 - 15:40 › PERFORMANCE EVALUATION OF CSARAO-1 HYBRID ALGORITHM ON ESTIMATING SPATIALLY DISTRIBUTED HYDRAULIC CONDUCTIVITY TENSORS IN A STEADY-STATE GROUNDWATER FLOW MODEL - Walid Tadj, Amar Telidji University, Research Laboratory of Water Resources, Soil and Environment  
15:40 - 16:00 › NONLINEAR POROMECHANICAL MODELING OF WATER-CRACK INTERACTION IN CONCRETE GRAVITY DAMS - Mohammed Ibrahim Bessaid, Université de Tlemcen  
16:00 - 16:30 Coffee break and 1st Poster Session (Lobby)  
16:30 - 17:30 Heat transfer and thermohydraulics (Auditorium) - Yan Delauré and Djamel Sadaoui (+)  
16:30 - 16:50 › Conjugate heat transfer model for multiphase flow : Application to a liquid piston gas compression - Mustapha BENAOUICHA, Segula Technologies. Naval and Energy Engineering Research and Innovation Unit. 9 avenue Edouard Belin, 92500 Rueil-Malmaison, France  
16:50 - 17:10 › CFD analysis of thermo-hydraulic mixing in short microfluidic devices - KOUADRI Amar, Department of Mechanical Engineering, University of Djelfa, Djelfa 17000, Algeria  
17:10 - 17:30 › Computational study of thermo-hydraulic performance of curved tube receiver operating with and without nanofluid - Tawfiq Chekifi, Unité de Recherche Appliqué en Energies Renouvelables, URAER, Centre de Développement des Energies Renouvelables, CDER, 47133, Ghardaïa, Algeria - Moustafa Boukraa, Research Center in Industrial Technologies (CRTI), P.O. Box 64 Cheraga 16014. Algiers. ALGERIA.  

Tuesday, November 14, 2023

Time Event (+)
08:00 - 08:50 Registration - Attendees welcome and registration  
08:50 - 10:30 Fluid flow around structures (Auditorium) - Sylvain Guillou and Ali Hatem Laatar (+)  
08:50 - 09:10 › EFFECT OF FLEXIBILITY ON THE HYDRODYNAMIC PERFORMANCES OF A 3D PITCHING PLATE - Nathan Lemartinel, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique, Segula Technologies [France]  
09:10 - 09:30 › A NUMERICAL FSI SIMULATION OF THE HYDROELASTIC RESPONSE OF A FLEXIBLE NACA0015 IN TURBULENT FLOW - Mustapha Benaouicha, Segula Technologies, LUSAC (France)  
09:30 - 09:50 › Design and experimentation of a tandem axis fluttering hydrofoil - Ludovic Chatellier, Institut Pprime  
09:50 - 10:10 › A Robust Framework for Simulating Fluid-Structure Interactions of Highly Deformable Slender Bodies: Sharp Interface Immersed Boundary Method for Low Density Ratios and High Reynolds Flow - Yan Delauré, Dublin City University [Dublin]  
10:10 - 10:30 › MULTIDISCIPLINARY ANALYSIS OF A UAV WING USING OPEN SOURCE SOFTWARE INTEGRATION - Abdelkader Benaouali, Ecole Militaire Polytechnique [Alger]  
10:30 - 11:00 Coffee break and 2nd Poster Session (Lobby)  
11:00 - 12:00 Experimental analysis of fluid induced vibration on lifting surfaces in a hydrodynamic tunnel (Auditorium) - Professor Jacques-André ASTOLFI  
12:00 - 14:00 Lunch  
14:00 - 16:00 Mechanical engineering (Room 1) - Djamel Sadaoui and Abdelhamid Becheur (+)  
14:00 - 14:20 › EFFECTS OF VARIOUS SHAPED HOLES ON FILM COOLING EFFECTIVENESS - Ilyes Belouddane, Faculty of Mechanical Engineering, USTO-MB, Oran, Faculty of Mechanical Engineering, USTO-MB, Oran  
14:20 - 14:40 › A COMPARATIVE STUDY ON UNSTEADY MODEL FOR THE THERMAL CHARACTERIZATION OF FIREFIGHTER PROTECTIVE CLOTHING - Chafik BENSALEM, Department of Mechanical Engineering, Faculty of Sciences and Applied Sciences, University Akli Mohand Oulhadj of Bouira,10000, Bouira, Algeria  
14:40 - 15:00 › NUMERICAL STUDY of FORCED CONVECTION HEAT TRANSFER in TAYLOR-COUETTE SYSTEM without AXIAL FLOW - Ismahane Chaieb, University Freres-Mentouri Constantine1,Constantine. - Toufik Boufendi, University Freres-Mentouri Constantine1,Constantine.  
15:00 - 15:20 › Effect of texturing tilting pads journal bearing on tribological and mechanical behavior - Foullani Abdelhalim, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]  
15:20 - 15:40 › INFLUENCE OF TWO-PHASE AND SINGLE-PHASE FLUIDS IN SLIDING BEARINGS OPERATING UNDER TURBULENT REGIME. - Imene BOUCHELAGHEM, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]  
15:40 - 16:00 › EFFECT OF COLUMN LENGTH ON THE PERFORMANCE OF AN AIRLIFT PUMP - Hamid Tighzert, Faculty of Technology, Department of Process Engineering, Environmental Engineering Laboratory, University of Bejaia, 06000, Algeria  
14:00 - 16:00 Fluid Flow and turbulence (Room 2) - Lyes Amara and Ali Hatem Laatar (+)  
14:00 - 14:20 › Characterization of turbulent separated flow on backward facing step - KOUAH Salim, blida 1 univercity, AMC  
14:20 - 14:40 › Crushing of a Newtonian fluid between two circular disks - Rafik BENCHALLAL, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa]  
14:40 - 15:00 › STABILITY OF BOUNDARY LAYER STAGNATION POINT FLOW OVER A STRETCHING/SHRINKING SHEET WITH SUCTION - Meheni BOUTAGHANE, Laboratoire de Mécanique Matériaux et Energétique, Faculté de Technologie, Université de Bejaia, 06000 Bejaia  
15:00 - 15:20 › Stretching/shrinking effect on thermal stability of three-dimensional stagnation point flow - Samir MAMACHE, Université Abderrahmane Mira [Béjaïa] - MENDIL FATSAH, Université Abderrahmane Mira [Béjaïa] - Faïçal Naït Bouda, Université Abderrahmane Mira [Béjaïa]  
15:20 - 15:40 › CONTROL OF NON-NEWTONIAN LIQUID FILM FLOW ON AN INCLINED PLANE - ABDELMALEK MEHAYECH, University of Bejaia  
15:40 - 16:00 › Evaluating a transition-turbulence model at high Reynolds numbers for aerodynamic analysis of a symetrical NACA airfoil - Fatima Zohra GUERRAB, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran]  
16:00 - 16:30 Coffee break and 2nd Poster Session (Lobby)  
16:30 - 17:30 Sloshing tank (Auditorium) - Moussa Allouche (+)  
16:30 - 16:50 › LIQUID SLOSHING IN 2D FLEXIBLE RECTANGULAR TANK SUBJECTED TO SEISMIC EXCITATION - Kim KHA, Segula Technologies [France]  
16:50 - 17:10 › NONLINEAR SLOSHING OF TWO SUPERIMPOSED IMMISCIBLE LIQUIDS IN A TWO-DIMENSIONAL RECTANGULAR TANK - MEZIANI Bachir, Laboratoire de physique théorique  
17:10 - 17:30 › DYNAMICS OF A DEFORMABLE FLOATING LIQUID TANK UNDER A REGULAR WAVE EFFECT - Fatiha GHOUINI, Research Laboratory of Applied Hydraulics and Environment, Faculty of Technology, University of Bejaia, Université de Caen Normandie, LUSAC, EA 4253, Normandy Université  

Wednesday, November 15, 2023

Time Event (+)
08:00 - 08:50 Registration - Attendees welcome and registration  
08:50 - 10:30 Hydraulic structures (Auditorium) - Abdelhamid Becheur and Djamaleddine Boumzerane (+)  
08:50 - 09:10 › SEISMIC ANALYSIS OF A CONCRETE GRAVITY DAM TAKING INTO ACCOUNT FLUID-STRUCTURE INTERACTION - Zahia Abdelli, Research Laboratory of Applied Hydraulic and Environment LRHAE, Faculty of Technology, University of Bejaia, Algeria  
09:10 - 09:30 › A fast-time simulation for the deformation of a liquid-core capsule in flow using Dynamic Reduced Model - Toufik Boubehziz, Équipe Linguistique computationnelle  
09:30 - 09:50 › A SEMI-ANALYTICAL METHOD FOR PARAMETRIC ANALYSIS OF HYDROSEISMIC FORCES ON DAMS - Abdelmadjid TADJADIT, Ecole Nationale Polytechnique [Alger]  
09:50 - 10:10 › A PORO-FRACTURE MODEL FOR WATER-CRACK INETRACTION IN CONCRETE UNDER SEISMIC LOADINGS - Mohammed Matallah, Université de Tlemcen  
10:10 - 10:30 › IMPLEMENTATION OF AAR MODEL FOR CONCRETE IN ABAQUS EXPLICIT: APPLICATION TO HYDRAULIC STRUCTURE - Ali Nour, Hydro-Québec  
10:30 - 11:00 Coffee break and 3rd Poster Session (Lobby)  
11:00 - 12:00 A Few Questions Arising in Optimal Control and Application (Auditorium) - Professor Philippe Destuynder  
12:00 - 14:00 Lunch  
14:00 - 18:30 Sightseeing tour - Béjaia and its surroundings  
19:00 - 22:00 Conference dinner and closing ceremony  
Online user: 1 Privacy
Loading...