International Conference on Engineering Fluid Structure Interaction

8:00 - 8:50 (50min)

Registration

Attendees welcome and registration

8:50 - 10:30 (1h40)

Fluid flow around structures

Auditorium

Sylvain Guillou and Ali Hatem Laatar

› EFFECT OF FLEXIBILITY ON THE HYDRODYNAMIC PERFORMANCES OF A 3D PITCHING PLATE - Nathan Lemartinel, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique, Segula Technologies [France] 08:50-09:10 (20min)

› A NUMERICAL FSI SIMULATION OF THE HYDROELASTIC RESPONSE OF A FLEXIBLE NACA0015 IN TURBULENT FLOW - Mustapha Benaouicha, Segula Technologies, LUSAC (France) 09:10-09:30 (20min)

› Design and experimentation of a tandem axis fluttering hydrofoil - Ludovic Chatellier, Institut Pprime 09:30-09:50 (20min)

› A Robust Framework for Simulating Fluid-Structure Interactions of Highly Deformable Slender Bodies: Sharp Interface Immersed Boundary Method for Low Density Ratios and High Reynolds Flow - Yan Delauré, Dublin City University [Dublin] 09:50-10:10 (20min)

› MULTIDISCIPLINARY ANALYSIS OF A UAV WING USING OPEN SOURCE SOFTWARE INTEGRATION - Abdelkader Benaouali, Ecole Militaire Polytechnique [Alger] 10:10-10:30 (20min)

10:30 - 11:00 (30min)

Coffee break and 2nd Poster Session

Lobby

11:00 - 12:00 (1h)

Experimental analysis of fluid induced vibration on lifting surfaces in a hydrodynamic tunnel

Auditorium

Professor Jacques-André ASTOLFI

12:00 - 14:00 (2h)

Lunch

14:00 - 16:00 (2h)

Mechanical engineering

Room 1

Djamel Sadaoui and Abdelhamid Becheur

› EFFECTS OF VARIOUS SHAPED HOLES ON FILM COOLING EFFECTIVENESS - Ilyes Belouddane, Faculty of Mechanical Engineering, USTO-MB, Oran, Faculty of Mechanical Engineering, USTO-MB, Oran 14:00-14:20 (20min)

› A COMPARATIVE STUDY ON UNSTEADY MODEL FOR THE THERMAL CHARACTERIZATION OF FIREFIGHTER PROTECTIVE CLOTHING - Chafik BENSALEM, Department of Mechanical Engineering, Faculty of Sciences and Applied Sciences, University Akli Mohand Oulhadj of Bouira,10000, Bouira, Algeria 14:20-14:40 (20min)

› NUMERICAL STUDY of FORCED CONVECTION HEAT TRANSFER in TAYLOR-COUETTE SYSTEM without AXIAL FLOW - Ismahane Chaieb, University Freres-Mentouri Constantine1,Constantine. - Toufik Boufendi, University Freres-Mentouri Constantine1,Constantine. 14:40-15:00 (20min)

› Effect of texturing tilting pads journal bearing on tribological and mechanical behavior - Foullani Abdelhalim, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran] 15:00-15:20 (20min)

› INFLUENCE OF TWO-PHASE AND SINGLE-PHASE FLUIDS IN SLIDING BEARINGS OPERATING UNDER TURBULENT REGIME. - Imene BOUCHELAGHEM, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran] 15:20-15:40 (20min)

› EFFECT OF COLUMN LENGTH ON THE PERFORMANCE OF AN AIRLIFT PUMP - Hamid Tighzert, Faculty of Technology, Department of Process Engineering, Environmental Engineering Laboratory, University of Bejaia, 06000, Algeria 15:40-16:00 (20min)

14:00 - 16:00 (2h)

Fluid Flow and turbulence

Room 2

Lyes Amara and Ali Hatem Laatar

› Characterization of turbulent separated flow on backward facing step - KOUAH Salim, blida 1 univercity, AMC 14:00-14:20 (20min)

› Crushing of a Newtonian fluid between two circular disks - Rafik BENCHALLAL, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa] 14:20-14:40 (20min)

› STABILITY OF BOUNDARY LAYER STAGNATION POINT FLOW OVER A STRETCHING/SHRINKING SHEET WITH SUCTION - Meheni BOUTAGHANE, Laboratoire de Mécanique Matériaux et Energétique, Faculté de Technologie, Université de Bejaia, 06000 Bejaia 14:40-15:00 (20min)

› Stretching/shrinking effect on thermal stability of three-dimensional stagnation point flow - Samir MAMACHE, Université Abderrahmane Mira [Béjaïa] - MENDIL FATSAH, Université Abderrahmane Mira [Béjaïa] - Faïçal Naït Bouda, Université Abderrahmane Mira [Béjaïa] 15:00-15:20 (20min)

› CONTROL OF NON-NEWTONIAN LIQUID FILM FLOW ON AN INCLINED PLANE - ABDELMALEK MEHAYECH, University of Bejaia 15:20-15:40 (20min)

› Evaluating a transition-turbulence model at high Reynolds numbers for aerodynamic analysis of a symetrical NACA airfoil - Fatima Zohra GUERRAB, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran] 15:40-16:00 (20min)

16:00 - 16:30 (30min)

Coffee break and 2nd Poster Session

Lobby

16:30 - 17:30 (1h)

Sloshing tank

Auditorium

Moussa Allouche

› LIQUID SLOSHING IN 2D FLEXIBLE RECTANGULAR TANK SUBJECTED TO SEISMIC EXCITATION - Kim KHA, Segula Technologies [France] 16:30-16:50 (20min)

› NONLINEAR SLOSHING OF TWO SUPERIMPOSED IMMISCIBLE LIQUIDS IN A TWO-DIMENSIONAL RECTANGULAR TANK - MEZIANI Bachir, Laboratoire de physique théorique 16:50-17:10 (20min)

› DYNAMICS OF A DEFORMABLE FLOATING LIQUID TANK UNDER A REGULAR WAVE EFFECT - Fatiha GHOUINI, Research Laboratory of Applied Hydraulics and Environment, Faculty of Technology, University of Bejaia, Université de Caen Normandie, LUSAC, EA 4253, Normandy Université 17:10-17:30 (20min)

Planning