Planning

Week Mon. 13 Tue. 14 Wed. 15 List

	Mon. 13	Tue. 14	Wed. 15
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00	Registration 8:00 - 8:50 (50min) Registration Attendees welcome and registration Opening speech 8:50 - 9:30 (40min) Opening speech Auditorium Conference Organizers and Rector of the Unviersity of Bejaia Medieval Béjaia: Center for the Transmission of The Mediterranean Knowledge 9:30 - 10:30 (1h) Medieval Béjaia: Center for the Transmission of The Mediterranean Knowledge Auditorium Professor Djamil Aissani Coffee break and 1st Poster Session 10:30 - 11:00 (30min) Coffee break and 1st Poster Session Lobby Marine Renewable Energies and Fluid structure Interaction: a recent story 11:00 - 12:00 (1h) Marine Renewable Energies and Fluid structure Interaction: a recent story Auditorium Professor Sylvain Guillou Lunch 12:00 - 14:00 (2h) Lunch Hydrodynamics Soil and porous media 14:00 - 16:00 (2h) Hydrodynamics Room 1 Sylvain Guillou and Faiçal Nait Bouda › The hydrodynamic analysis of planing hulls - Rachid Tayeb, Laboratoire d'Aear-Hydrodynamique naval (LAHN) 14:00-14:20 (20min) › FLUID-STRUCTURE INTERACTION WITH VISCOELASTICITY IN NUMERICAL SIMULATION OF WATER HAMMER - Boualem Messaoudene, Université Mouloud Mammeri [Tizi Ouzou] 14:20-14:40 (20min) › NUMERICAL ANALYSIS OF FLUID-STRUCTURE INTERACTION IN LID-DRIVEN CAVITY WITH DISTURBING ELEMENTS - Nesrine ABDELLI, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa] 14:40-15:00 (20min) › FLUID-STRUCTURE INTERACTION MODELLING APPLIED FOR WIND TURBINE BLADE - Bekhti Ahmed, Centre de Développement des Energies Renouvelables - Ali Boudis, Centre de Développement des Energies Renouvelables - Madjid TATA, Centre de Développement des Energies Renouvelables 15:00-15:20 (20min) › NUMERICAL PREDICTION OF THE EFFECT OF CONTACT CONDITIONS ON THE SEISMIC DAMAGE BEHAVIOR OF GRAVITY DAMS - Zahia Abdelli, Research Laboratory of Applied Hydraulic and Environment LRHAE, Faculty of Technology, University of Bejaia, Algeria 15:20-15:40 (20min) › MAGNETO-HYDRODYNAMIC COUPLING OF A SEA WAVE ENERGY CONVERSION SYSTEM - Bachir Ouartal, LATAGE, Laboratory, Mouloud Mammeri University of Tizi-Ouzou, B.P17 RP, Tizi-Ouzou, 15000,Algeria - ZAOUIA Mustapha, LATAGE, Laboratory, Mouloud Mammeri University of Tizi-Ouzou, B.P17 RP, Tizi-Ouzou, 15000,Algeria 15:40-16:00 (20min) 14:00 - 16:00 (2h) Soil and porous media Room 2 Ouali Amiri and Mouloud Mansouri › BI-DIRECTIONAL NONLINEAR SEISMIC RESPONSE OF A POROVISCOELASTIC SOIL PROFILE UNDER DIFFERENT CONDITIONS OF PORE WATER-SATURATION - Toufiq OUZANDJA, National Earthquake Engineering Research Center (CGS), Seismic Hazard Division,, Ecole Nationale Supérieure des travaux Publics, Laboratoire des Travaux Publics Ingénierie de Transport et Environnement (TPiTE) 14:00-14:20 (20min) › DEM Investigation of the Effect of Particle Friction on the Bearing Capacity of Shallow Foundations in Granular Soils - Ahlem Rezig, Unité de Recherche Matériaux Emergents (URME) 14:20-14:40 (20min) › INFLUENCE OF INTERSTITIAL PRESSURE ON SWELLING PARAMETERS OF CLAYEY SOILS - Mehdi MEBARKI, Faculty of Science and Technology, Department of Science and Technology, Tamanghasset University, Civil Engineering Laboratory, Risks and Soil-Structure Interaction (LGC - ROI), University of Batna 2 14:40-15:00 (20min) › Internal erosion modeling based on mass transfer in porous media - Abderrezak Bouziane, Université de Bejaia, Laboratoire de génie de la construction et architecture 15:00-15:20 (20min) › PERFORMANCE EVALUATION OF CSARAO-1 HYBRID ALGORITHM ON ESTIMATING SPATIALLY DISTRIBUTED HYDRAULIC CONDUCTIVITY TENSORS IN A STEADY-STATE GROUNDWATER FLOW MODEL - Walid Tadj, Amar Telidji University, Research Laboratory of Water Resources, Soil and Environment 15:20-15:40 (20min) › NONLINEAR POROMECHANICAL MODELING OF WATER-CRACK INTERACTION IN CONCRETE GRAVITY DAMS - Mohammed Ibrahim Bessaid, Université de Tlemcen 15:40-16:00 (20min) Coffee break and 1st Poster Session 16:00 - 16:30 (30min) Coffee break and 1st Poster Session Lobby Heat transfer and thermohydraulics 16:30 - 17:30 (1h) Heat transfer and thermohydraulics Auditorium Yan Delauré and Djamel Sadaoui › Conjugate heat transfer model for multiphase flow : Application to a liquid piston gas compression - Mustapha BENAOUICHA, Segula Technologies. Naval and Energy Engineering Research and Innovation Unit. 9 avenue Edouard Belin, 92500 Rueil-Malmaison, France 16:30-16:50 (20min) › CFD analysis of thermo-hydraulic mixing in short microfluidic devices - KOUADRI Amar, Department of Mechanical Engineering, University of Djelfa, Djelfa 17000, Algeria 16:50-17:10 (20min) › Computational study of thermo-hydraulic performance of curved tube receiver operating with and without nanofluid - Tawfiq Chekifi, Unité de Recherche Appliqué en Energies Renouvelables, URAER, Centre de Développement des Energies Renouvelables, CDER, 47133, Ghardaïa, Algeria - Moustafa Boukraa, Research Center in Industrial Technologies (CRTI), P.O. Box 64 Cheraga 16014. Algiers. ALGERIA. 17:10-17:30 (20min)	Registration 8:00 - 8:50 (50min) Registration Attendees welcome and registration Fluid flow around structures 8:50 - 10:30 (1h40) Fluid flow around structures Auditorium Sylvain Guillou and Ali Hatem Laatar › EFFECT OF FLEXIBILITY ON THE HYDRODYNAMIC PERFORMANCES OF A 3D PITCHING PLATE - Nathan Lemartinel, Laboratoire de recherche en Hydrodynamique, Énergétique et Environnement Atmosphérique, Segula Technologies [France] 08:50-09:10 (20min) › A NUMERICAL FSI SIMULATION OF THE HYDROELASTIC RESPONSE OF A FLEXIBLE NACA0015 IN TURBULENT FLOW - Mustapha Benaouicha, Segula Technologies, LUSAC (France) 09:10-09:30 (20min) › Design and experimentation of a tandem axis fluttering hydrofoil - Ludovic Chatellier, Institut Pprime 09:30-09:50 (20min) › A Robust Framework for Simulating Fluid-Structure Interactions of Highly Deformable Slender Bodies: Sharp Interface Immersed Boundary Method for Low Density Ratios and High Reynolds Flow - Yan Delauré, Dublin City University [Dublin] 09:50-10:10 (20min) › MULTIDISCIPLINARY ANALYSIS OF A UAV WING USING OPEN SOURCE SOFTWARE INTEGRATION - Abdelkader Benaouali, Ecole Militaire Polytechnique [Alger] 10:10-10:30 (20min) Coffee break and 2nd Poster Session 10:30 - 11:00 (30min) Coffee break and 2nd Poster Session Lobby Experimental analysis of fluid induced vibration on lifting surfaces in a hydrodynamic tunnel 11:00 - 12:00 (1h) Experimental analysis of fluid induced vibration on lifting surfaces in a hydrodynamic tunnel Auditorium Professor Jacques-André ASTOLFI Lunch 12:00 - 14:00 (2h) Lunch Mechanical engineering Fluid Flow and turbulence 14:00 - 16:00 (2h) Mechanical engineering Room 1 Djamel Sadaoui and Abdelhamid Becheur › EFFECTS OF VARIOUS SHAPED HOLES ON FILM COOLING EFFECTIVENESS - Ilyes Belouddane, Faculty of Mechanical Engineering, USTO-MB, Oran, Faculty of Mechanical Engineering, USTO-MB, Oran 14:00-14:20 (20min) › A COMPARATIVE STUDY ON UNSTEADY MODEL FOR THE THERMAL CHARACTERIZATION OF FIREFIGHTER PROTECTIVE CLOTHING - Chafik BENSALEM, Department of Mechanical Engineering, Faculty of Sciences and Applied Sciences, University Akli Mohand Oulhadj of Bouira,10000, Bouira, Algeria 14:20-14:40 (20min) › NUMERICAL STUDY of FORCED CONVECTION HEAT TRANSFER in TAYLOR-COUETTE SYSTEM without AXIAL FLOW - Ismahane Chaieb, University Freres-Mentouri Constantine1,Constantine. - Toufik Boufendi, University Freres-Mentouri Constantine1,Constantine. 14:40-15:00 (20min) › Effect of texturing tilting pads journal bearing on tribological and mechanical behavior - Foullani Abdelhalim, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran] 15:00-15:20 (20min) › INFLUENCE OF TWO-PHASE AND SINGLE-PHASE FLUIDS IN SLIDING BEARINGS OPERATING UNDER TURBULENT REGIME. - Imene BOUCHELAGHEM, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran] 15:20-15:40 (20min) › EFFECT OF COLUMN LENGTH ON THE PERFORMANCE OF AN AIRLIFT PUMP - Hamid Tighzert, Faculty of Technology, Department of Process Engineering, Environmental Engineering Laboratory, University of Bejaia, 06000, Algeria 15:40-16:00 (20min) 14:00 - 16:00 (2h) Fluid Flow and turbulence Room 2 Lyes Amara and Ali Hatem Laatar › Characterization of turbulent separated flow on backward facing step - KOUAH Salim, blida 1 univercity, AMC 14:00-14:20 (20min) › Crushing of a Newtonian fluid between two circular disks - Rafik BENCHALLAL, Laboratoire de Mécanique, Matériaux et Energétique [Béjaïa] 14:20-14:40 (20min) › STABILITY OF BOUNDARY LAYER STAGNATION POINT FLOW OVER A STRETCHING/SHRINKING SHEET WITH SUCTION - Meheni BOUTAGHANE, Laboratoire de Mécanique Matériaux et Energétique, Faculté de Technologie, Université de Bejaia, 06000 Bejaia 14:40-15:00 (20min) › Stretching/shrinking effect on thermal stability of three-dimensional stagnation point flow - Samir MAMACHE, Université Abderrahmane Mira [Béjaïa] - MENDIL FATSAH, Université Abderrahmane Mira [Béjaïa] - Faïçal Naït Bouda, Université Abderrahmane Mira [Béjaïa] 15:00-15:20 (20min) › CONTROL OF NON-NEWTONIAN LIQUID FILM FLOW ON AN INCLINED PLANE - ABDELMALEK MEHAYECH, University of Bejaia 15:20-15:40 (20min) › Evaluating a transition-turbulence model at high Reynolds numbers for aerodynamic analysis of a symetrical NACA airfoil - Fatima Zohra GUERRAB, Université des sciences et de la Technologie dÓran Mohamed Boudiaf [Oran] 15:40-16:00 (20min) Coffee break and 2nd Poster Session 16:00 - 16:30 (30min) Coffee break and 2nd Poster Session Lobby Sloshing tank 16:30 - 17:30 (1h) Sloshing tank Auditorium Moussa Allouche › LIQUID SLOSHING IN 2D FLEXIBLE RECTANGULAR TANK SUBJECTED TO SEISMIC EXCITATION - Kim KHA, Segula Technologies [France] 16:30-16:50 (20min) › NONLINEAR SLOSHING OF TWO SUPERIMPOSED IMMISCIBLE LIQUIDS IN A TWO-DIMENSIONAL RECTANGULAR TANK - MEZIANI Bachir, Laboratoire de physique théorique 16:50-17:10 (20min) › DYNAMICS OF A DEFORMABLE FLOATING LIQUID TANK UNDER A REGULAR WAVE EFFECT - Fatiha GHOUINI, Research Laboratory of Applied Hydraulics and Environment, Faculty of Technology, University of Bejaia, Université de Caen Normandie, LUSAC, EA 4253, Normandy Université 17:10-17:30 (20min)	Registration 8:00 - 8:50 (50min) Registration Attendees welcome and registration Hydraulic structures 8:50 - 10:30 (1h40) Hydraulic structures Auditorium Abdelhamid Becheur and Djamaleddine Boumzerane › SEISMIC ANALYSIS OF A CONCRETE GRAVITY DAM TAKING INTO ACCOUNT FLUID-STRUCTURE INTERACTION - Zahia Abdelli, Research Laboratory of Applied Hydraulic and Environment LRHAE, Faculty of Technology, University of Bejaia, Algeria 08:50-09:10 (20min) › A fast-time simulation for the deformation of a liquid-core capsule in flow using Dynamic Reduced Model - Toufik Boubehziz, Équipe Linguistique computationnelle 09:10-09:30 (20min) › A SEMI-ANALYTICAL METHOD FOR PARAMETRIC ANALYSIS OF HYDROSEISMIC FORCES ON DAMS - Abdelmadjid TADJADIT, Ecole Nationale Polytechnique [Alger] 09:30-09:50 (20min) › A PORO-FRACTURE MODEL FOR WATER-CRACK INETRACTION IN CONCRETE UNDER SEISMIC LOADINGS - Mohammed Matallah, Université de Tlemcen 09:50-10:10 (20min) › IMPLEMENTATION OF AAR MODEL FOR CONCRETE IN ABAQUS EXPLICIT: APPLICATION TO HYDRAULIC STRUCTURE - Ali Nour, Hydro-Québec 10:10-10:30 (20min) Coffee break and 3rd Poster Session 10:30 - 11:00 (30min) Coffee break and 3rd Poster Session Lobby A Few Questions Arising in Optimal Control and Application 11:00 - 12:00 (1h) A Few Questions Arising in Optimal Control and Application Auditorium Professor Philippe Destuynder Lunch 12:00 - 14:00 (2h) Lunch Sightseeing tour 14:00 - 18:30 (4h30) Sightseeing tour Béjaia and its surroundings Conference dinner and closing ceremony 19:00 - 22:00 (3h) Conference dinner and closing ceremony

Online user: 1

Privacy